Acid_dissociation_constant

An acid dissociation constant, denoted by K_a, is an equilibrium constant for the dissociation of a weak acid. According to the Brønsted-Lowry theory of acids and bases, an acid is a proton donor (HA, where H represents an acidic hydrogen atom), and a base is a proton acceptor. In aqueous solution, water can function as a base, as in the following general example.

HA + H₂O $\backslash rightleftharpoons$ A^- + H₃O⁺

Acid dissociation constants are also known as the acidity constant or the acid-ionization constant. The term is also used for pK_a, which is equal to the negative decimal logarithm of K_a (cologarithm of K_a).

Concepts in Chemical Equilibria
Acid dissociation constant
Binding constant
Chemical equilibrium
Chemical stability
Dissociation constant
Distribution coefficient
Distribution ratio
Equilibrium constant
Equilibrium unfolding
Equilibrium stage
Liquid-liquid extraction
Phase diagram
Phase rule
Reaction quotient
Relative volatility
Solubility equilibrium
Stability constant
Thermodynamic equilibrium
Theoretical plate
Vapor-liquid equilibrium
edit

Contents 1 Definitions 1.1 Monoprotic acids 1.2 Polyprotic acids 1.3 Bases 1.4 Protonation constants 1.5 Temperature dependence 2 Usage 3 Factors that determine the relative strengths of acids 4 Importance of pKa values 5 Acidity in nonaqueous solutions 6 pKa of some common substances 7 Further reading 8 See also 9 References 10 External links

Definitions

Monoprotic acids

When an acid, HA, dissolves in water, some molecules of the acid \'dissociate\' to form hydronium ions and the conjugate base, (A^-), of the acid.

$H\; A\; \backslash rightleftharpoons\; H^\{+\}\; +\; A^\{-\}$

It is understood that $H^\{+\}$ stands for the hydronium ion and that each species in this equilibrium may solvate to a greater or lesser extent. The acid dissociation constant is defined as

$K\_a\; =\; \backslash frac\{[\backslash mbox\{H\}^+][\backslash mbox\{A\}^-\; ]\}\; \{[\backslash mbox\{HA\}]\}$

where the square brackets are usually taken to signify concentration. $H\_2\; O$ is omitted from these expressions because in dilute solution the concentration of water may be assumed to be constant. Values of $K\_a$ vary over many orders of magnitude, so it is common to take the negative logarithm to base ten of the value.

$\backslash operatorname\{p\}K\_a\; =\; -\backslash log\_\{10\}\; K\_a$

It is easier to compare the strengths of different acids by comparing $pK\_a$ values as they vary over a much smaller range.

Polyprotic acids

A polyprotic acid is one that has more than one proton to dissociate. Typical examples are malonic acid, which has two ionizable protons, and phosphoric acid, which has three. The constant for dissociation of the first proton may be denoted as $pK\_\{a1\}$ and the constants for dissociation of successive protons as $pK\_\{a2\}$, etc.

It is generally true that successive pK values increase (Pauling\'s first rule). Greenwood, N. N.; Earnshaw, A. (1997). Chemistry of the Elements, 2nd Edition, Oxford:Butterworth-Heinemann. ISBN 0-7506-3365-4.  p. 50 For example, for a diprotic acid, $H\_2\; A$, the two equilibria are

$H\_2\; A\; \backslash rightleftharpoons\; HA^\{-\}\; +\; H^\{+\}$

$HA^\{-\}\; \backslash rightleftharpoons\; A^\{2-\}\; +\; H^\{+\}$

it can be seen that the second proton is removed from a negatively charged species. Since the proton carries a positive charge extra work is needed to remove it. Therefore $pK\_\{a2\}\; >\; pK\_\{a1\}$. There are a few exceptions to this rule which occur when there is a major structural change such as in the sequence

$VO\_2^\{+\}(aq)\; \backslash rightleftharpoons\; H\_3\; VO\_4\; +\; H^+$	$pK\_\{a1\}\; =\; 4.2$
$H\_3\; VO\_4\; \backslash rightleftharpoons\; H\_2\; VO\_4^\{-\}\; +\; H^\{+\}$	$pK\_\{a2\}\; =\; 2.60$
$H\_2\; VO\_4^\{-\}\; \backslash rightleftharpoons\; HVO\_4^\{2-\}\; +\; H^\{+\}$	$pK\_\{a3\}\; =\; 7.92$
$HVO\_4^\{2-\}\; \backslash rightleftharpoons\; VO\_4^\{3-\}\; +\; H^\{+\}$	$pK\_\{a4\}\; =\; 13.27$

The pKs of vanadic acid, $H\_3\; VO\_4$, follow Pauling\'s rule just like phosphoric acid (values below). All species in this series are tetrahedral, but $VO\_2\; \backslash left(\; H\_2\; O\; \backslash right)\_4\; ^\{+\}$ is octahedral and . Greenwood, N. N.; Earnshaw, A. (1997). Chemistry of the Elements, 2nd Edition, Oxford:Butterworth-Heinemann. ISBN 0-7506-3365-4.  Chapter 22

Bases

Historically the equilibrium constant $K\_b$ for a base was defined as the dissociation constant of $BH$, the acid conjugate to the base, $B$. Ionic charges on $B$ and/or $BH$ are omitted here because the base may be a neutral species such as ammonia or a charged species such as the ethanoate ion (acetate).

$B\; +\; H\_2\; O\; \backslash rightleftharpoons\; BH\; +\; OH^\{-\}$

Using similar reasoning to that used before

$K\_b\; =\; \backslash frac\{[\backslash mbox\{BH\}][\backslash mbox\{OH\}^-]\}\; \{[\backslash mbox\{B\}]\}$

$\backslash operatorname\{p\}K\_b\; =\; -\backslash log\_\{10\}\; K\_b\backslash ,$

Now, the concentration of the hydroxide ion is related to the concentration of the hydronium by $K\_w\; =\; \backslash left[\; H^\{+\}\; \backslash right]\backslash left[\; OH^\{-\}\; \backslash right]$, therefore

$[\backslash mbox\{OH\}^-]\; =\; \backslash frac\{K\_w\}\{[\backslash mbox\{H\}^+]\}$;

$K\_w$ is the constant for the self-ionization of water. Substituting the expression for $\backslash left[\; OH^\{-\}\; \backslash right]$ into the expression for $K\_b$

$K\_b\; =\; K\_w\; \backslash frac\{\; \backslash left[\; \backslash mbox\{BH\}\; \backslash right]\; \}\{\; \backslash left[\; \backslash mbox\{B\}\; \backslash right]\; \backslash left[\; \backslash mbox\{H\}^\{+\}\; \backslash right]\; \}\; =\; \backslash frac\{K\_w\}\{K\_a\}$

It follows that

$pK\_b\; =\; pK\_w\; -\; pK\_a$

In water at 25 °C $pK\_w$ is 14 so then $pK\_b\; =\; 14\; -\; pK\_a$.

In effect there is no need to define $pK\_b$ separately from $pK\_a$, but it is done because $pK\_b$ values can be found in literature.

Protonation constants

The protonation constant for a substance $S$, is given by

$S\; +\; H^\{+\}\; \backslash rightleftharpoons\; SH$

$K\_\{assoc\}\; =\; \backslash frac\{[\backslash mbox\{SH\}]\}\; \{[\backslash mbox\{S\}][\backslash mbox\{H\}^+]\}$

Again, ionic charges are omitted from $S$ and $SH$. $K\_\{assoc\}$ is an association constant.

• For any substance $\backslash log\_\{10\}\; \backslash left(\; K\_\{assoc\}\; \backslash right)\; =\; pK\_a$

Temperature dependence

All equilibrium constants vary with temperature according the van \'t Hoff equation

$\backslash frac\; \{d\backslash ln\; K\}\; \{dT\}\; =\; \backslash frac\{\{\backslash Delta\; H\_m\}^\{\backslash Theta\}\}\; \{RT^2\}.$

Thus, for exothermic reactions, (ΔH is negative) K decreases with temperature, but for endothermic reactions (ΔH is positive) K increases with temperature.

Usage

The pH of a solution of weak acid can be expressed in terms of the extent of dissociation. After rearranging the expression defining the dissociation constant, and putting pH = -log₁₀[H⁺], one obtains

$\backslash mbox\{pH\}\; =\; \backslash mbox\{pK\}\_a\; -\; \backslash log\; \backslash frac\{[HA]\}\{[A^-]\}$

This is a form of the Henderson-Hasselbalch equation. It can be deduced from this expression that

• when the acid is 1% dissociated, that is, when $\backslash frac\{[HA]\}\{[A^-]\}\; =\; 100$, pH = pK_a – 2
• when the acid is 50% dissociated, that is, when $\backslash frac\{[HA]\}\{[A^-]\}\; =\; 1$, pH = pK_a
• when the acid is 99% dissociated, that is, when $\backslash frac\{[HA]\}\{[A^-]\}\; =\; 0.01$, pH = pK_a + 2

It follows that the range of pH within which there is partial dissociation of the acid is about pK_a $\backslash pm$ 2.This is shown graphically at the right.

A weak acid may be defined as an acid with pK_a greater than about -2. An acid with pK_a = -2 would be 99% dissociated at pH 0, that is, in a 1M HCl solution. Any acid with a pK_a less than about -2 is said to be a strong acid. Strong acids are said to be fully dissociated. There is no precise pK_a value that distinguishes between strong and weak acids because strong acids, such as sulfuric acid, are associated in very concentrated solution.

On the pK_a scale of acid strength, a large value indicates a very weak acid, and a small value indicates a not so weak one.

The pH of a solution of a weak acid can be easily calculated when the analytical concentration of the acid is known. See ICE table for details.

Some polyprotic acids can be treated as a set of individual acids. This is possible when successive pK values differ by 4 or more. For example with phosphoric acid

H₃PO₄ $\backslash rightleftharpoons$ H₂PO₄^- +H⁺, pK_a1 = 2.15

H₂PO₄^- $\backslash rightleftharpoons$ HPO₄^2- +H⁺, pK_a2 = 7.20

HPO₄^2- $\backslash rightleftharpoons$ PO₄^3- +H⁺, pK_a3 = 12.37

Both the hydrogenphosphate and dihydrogenphosphate ions can be treated as acids in their own right. On the other hand, the two pKs for malonic acid are 2.51 and 5.05, so there are pH values at which both malonic acid and the hydrogenmalonate ion co-exist. More elaborate calculations are needed to calculate the composition of solutions of malonic acid.

Factors that determine the relative strengths of acids

Being an equilibrium constant, the acid dissociation constant K_a is determined by the standard free energy difference ΔG^o between the reactants and products, specifically, between the protonated (HA) and deprotonated (A⁻) forms of the substance.

Pauling\'s second rule states that the value of the first pK for acids of the formula XO_m(OH) _n is approximately independent of n and X and is approximately 8 for m=0, 2 for m=1, -3 for m=2 and <-10 for m=3. This correlates with the oxidation state of the central atom, X: the higher the oxidation state the stronger the oxyacid. For example, pK_a for HClO is 7.2, for HClO₂ is 2.0, for HClO₃ is -1 and HClO₄ is a strong acid.

With organic acids inductive effects and mesomeric effects affect the pKs. The effects are summarised in the Hammett equation and subsequent extensions.

Structural effects can also be important. The difference between fumaric acid and maleic acid is a classic example. Fumaric acid is (E)-1,4-but-2-enedioic acid, a trans isomer, whereas maleic acid is the corresponding cis isomer, i.e. (Z)-1,4-but-2-enedioic acid (see cis-trans isomerism). Fumaric acid has pK_as of approximately 3.5 and 4.5. By contrast, maleic acid has pK_as of approximately 1.5 and 6.5. The reason for this large difference is that when one proton is removed from the cis- isomer (maleic acid) a strong intramolecular hydrogen bond is formed with the nearby remaining carboxyl group. This favors the formation of the maleate H⁺, and it opposes the removal of the second proton from that species. In the trans isomer, the two carboxyl groups are always far apart, so hydrogen bonding is not observed.

Importance of pK_a values

The pK_a value(s) of a compound influence many characteristics of the compound such as its reactivity, and spectral properties (colour). In biochemistry the pK_a values of proteins and amino acid side chains are of major importance for the activity of enzymes and the stability of proteins. This property is of general importance in chemistry because ionization of a compound alters its physical behavior and macro properties such as solubility and lipophilicity. For example ionization of any compound will increase the solubility in water, but decrease the lipophilicity. This can be exploited in drug development to increase the concentration of a compound in the blood by adjusting the pKa of an ionizable group. This must be done with caution, however, since an ionized compound will pass less easily through cell membranes.

Further information: Protein pKa calculations

Acidity in nonaqueous solutions

Three properties of a solvent strongly affect acids and bases.

1. A Protic solvent can form hydrogen bonds and will promote ionisation.
2. A solvent with a high donor number is a strong Lewis base.
3. A solvent with a high dielectric constant (Relative permittivity) will promote ionisation.

	Donor number	dielectric constant
Acetonitrile	14.1	37.5
Dimethyl sulfoxide	29.8	45
Ethanol	31.5	24.3
Pyridine	33.1	12.3
Water	18	81.7

For a given acid, pK_a values will vary depending on solvent. The degree of dissociation of any acid increases with the increasing basicity of the solvent. On the other hand, dissociation is relatively less for solvents of low dielectric constant. An acidic solvent will also suppress dissociation of an acid. For example, hydrogen chloride is a weak acid, i.e. poorly ionised, when dissolved in the acidic solvent acetic acid.

Acidity scales have been developed for solvents aside from water, notably for dimethyl sulfoxide (abbrev. \'DMSO\') and acetonitrile.March, J. “Advanced Organic Chemistry” 4th Ed. J. Wiley and Sons, 1992: New York. ISBN 0-471-60180-2. It can be seen in the table above that DMSO is more basic than water, but its dielectric constant is less. DMSO is widely used as an alternative to water in evaluating acids and bases.

In solvents of low dielectric constant, ions tend to associate, which complicates the interpretation of pK_as. In particular, in aprotic solvents the process of homoconjugation occurs when the conjugate base forms a hydrogen bond with the parent acid as in the following equilibrium

HA + A^- $\backslash rightleftharpoons$ HA₂^-

Typically HA₂^- would have the structure A---H---A. This process does not occur in water because H₂O molecules are strong hydrogen bond donors and acceptors.

In acetonitrile solution, para-toluenesulfonic acid has a homoconjugation constant pK^f, of -2.9.Coetzee, J. F. and Padmanabhan, G. R., "Proton Acceptor Power and Homoconjugation of Mono- and Diamines", J. Amer. Chem. Soc.,1965, 87, 5005-5010. This indicates that the toluenesulfonate anion has a strong tendency to form a hydrogen bond with the parent acid. Homoconjugation has the effect of enhancing the acidity of acids, lowering their effective pK_as, by stabilizing the conjugate base. Due to homoconjugation, the proton-donating power of toluenesulfonic acid in acetonitrile solution is enhanced by a factor of nearly 800.

pK_a of some common substances

Measurements are at 25ºC in water for those with a pK_a at or above -1.76:

- 25.00: Fluoroantimonic acid - 15.00: Magic acid - 10.00: Fluorosulfuric acid - 10.00: Perchloric acid - 10.00: Hydroiodic acid - 9.00: Hydrobromic acid - 8.00: Hydrochloric acid - 3.00, 1.99: Sulfuric acid - 2.00: Nitric acid - 1.76: Hydronium ion 3.15: Hydrofluoric acid 3.60: Carbonic acid 3.75: Formic acid 4.04: Ascorbic acid (Vitamin C) 4.19: Succinic acid 4.20: Benzoic acid 4.63: Aniline* 4.76: Acetic acid 4.76: Dihydrogencitrate ion (Citrate) 5.21: Pyridine* 6.40: Monohydrogencitrate ion Citrate 6.99: Ethylenediamine*

7.00: Hydrogen sulfide, Imidazole* (as an acid) 7.50: Hypochlorous acid 9.25: Ammonia* 9.33: Benzylamine* 9.81: Trimethylamine* 9.99: Phenol 10.08: Ethylenediamine* 10.66: Methylamine* 10.73: Dimethylamine* 10.81: Ethylamine* 11.01: Triethylamine* 11.09: Diethylamine* 11.65: Hydrogen peroxide 12.50: Guanidine* 12.67: Monohydrogenphosphate ion (Phosphate) 14.58: Imidazole (as a base) 15.76: Water - 19.00 (pKb) Sodium amide 37.00: Lithium diisopropylamide (LDA) 45.00: Propane 50.00: Ethane

* Listed values for ammonia and amines are the pK_a values for the corresponding ammonium ions.

Further reading

• Atkins, Peter, and Loretta Jones. Chemical Principles: The Quest for Insight. 3rd ed. New York: W. H. Freeman and Company, 2005
• Housecroft, Catherine and Sharpe, Alan, Inorganic Chemistry, Prentice Hall, 2nd. edition, 2004. (Non-aqueous solvents)

See also

• Hammett equation
• QSAR
• Dissociation constant
• Henderson-Hasselbalch equation

References

External links

• Bordwell pKa Table in DMSO
• Shodor.org Acid-Base Chemistry
• Factors that Affect the Relative Strengths of Acids and Bases
• Purdue Chemistry
• Distribution diagrams of acids and bases (generation from p$K\_\{a\}$ values with free spreadsheet)
• SPARC Physical/Chemical property calculator
• List of Aqueous-Equilibrium Constants
• Free guide to pKa & logP interpretation and measurement

v • d • e Articles related to solutions
Solution	Ideal solution • Aqueous solution • Solid solution • Flory-Huggins • Mixture • Suspension (chemistry) • Colloid • Phase diagram • Eutectic point • Alloy
Concentration	Saturation (chemistry) • Supersaturation • Molar solution • Percentage solution • Serial dilution
Solubility	Solubility equilibrium • Total dissolved solids • Solvation • Solvation shell • Enthalpy change of solution • Lattice energy • Raoult\'s law • Henry\'s law • Solubility table (data) • Solubility chart
Solvent	(category) • Acid dissociation constant • Protic solvent • Inorganic nonaqueous solvent • Solvation • List of boiling and freezing information of solvents Partition coefficient • Polarity • Hydrophobe • Hydrophile • Lipophilic • Amphiphile

This article is licensed under the GNU Free Documentation License. It uses material from Wikipedia